Abstract This work concerns the issue of the generation of a clean, hydrogen rich syngas by means of biomass gasification for different downstream applications, such as fuel cell feeding. For a direct use of the syngas it is necessary to remove the major pollutants, first of all tar and particulate matter. Furthermore the production of a syngas with high content of hydrogen requires the reforming of methane. Ceramic catalytic filters have been proposed and tested to perform the removal of particulate and the steam reforming of tar and methane. The development of a CFD model is illustrated and discussed in this paper for the simulation of the ceramic catalytic filter behaviour inside the freeboard of a gasifier and the evaluation of its performance in the steam reforming of tar and methane. The kinetics of the chemical reactions inserted in the model were taken from literature. The model was validated by comparing the simulation outputs with experimental results of tests on a bench scale gasifier containing a ceramic catalytic filter. The model was then used to study the main parameters that have an influence on the performance of the catalytic filters. In particular the variables were temperature (750-850 °C) and filtration velocity (70-110 m/h). A stronger temperature dependency on the conversion of some hydrocarbons has been observed; in particular by increasing the temperature of 100 °C the conversion of CH<inf>4</inf> and C<inf>7</inf>H<inf>8</inf> rises of approximately 2 times, while the conversion of C<inf>6</inf>H<inf>6</inf> and C<inf>10</inf>H<inf>8</inf> rises of approximately 4 times. The best conditions for the conversion of tar and methane appear to be highest temperature (850 °C) and lowest filtration velocity (70 m/h). In this case the conversion obtained for methane and tar are about 33% for CH<inf>4</inf>, 41% for C<inf>6</inf>H<inf>6</inf>, 75% for C<inf>7</inf>H<inf>8</inf> and 85% for C<inf>10</inf>H<inf>8</inf>.

Development of a CFD model for the simulation of tar and methane steam reforming through a ceramic catalytic filter

DI CARLO, ANDREA;FOSCOLO, Pier Ugo
2015-01-01

Abstract

Abstract This work concerns the issue of the generation of a clean, hydrogen rich syngas by means of biomass gasification for different downstream applications, such as fuel cell feeding. For a direct use of the syngas it is necessary to remove the major pollutants, first of all tar and particulate matter. Furthermore the production of a syngas with high content of hydrogen requires the reforming of methane. Ceramic catalytic filters have been proposed and tested to perform the removal of particulate and the steam reforming of tar and methane. The development of a CFD model is illustrated and discussed in this paper for the simulation of the ceramic catalytic filter behaviour inside the freeboard of a gasifier and the evaluation of its performance in the steam reforming of tar and methane. The kinetics of the chemical reactions inserted in the model were taken from literature. The model was validated by comparing the simulation outputs with experimental results of tests on a bench scale gasifier containing a ceramic catalytic filter. The model was then used to study the main parameters that have an influence on the performance of the catalytic filters. In particular the variables were temperature (750-850 °C) and filtration velocity (70-110 m/h). A stronger temperature dependency on the conversion of some hydrocarbons has been observed; in particular by increasing the temperature of 100 °C the conversion of CH4 and C7H8 rises of approximately 2 times, while the conversion of C6H6 and C10H8 rises of approximately 4 times. The best conditions for the conversion of tar and methane appear to be highest temperature (850 °C) and lowest filtration velocity (70 m/h). In this case the conversion obtained for methane and tar are about 33% for CH4, 41% for C6H6, 75% for C7H8 and 85% for C10H8.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11697/101422
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 26
  • ???jsp.display-item.citation.isi??? 21
social impact