In order to set integrated procedures involving geotechnical and structural aspects finalized to buildings diagnostics, uncertainty aspects are discussed concerning three-axis accelerometers and inclinometers for a distributed sensor network, allowing us to operate in a selective manner and preferring the most critical situations. Main topics to be considered for the uncertainty evaluation of measurements and of information to be used for building diagnostics are discussed. As a first step of the whole procedure of uncertainty evaluation, particular attention is dedicated to the calibration of sensors to be used, taking into account the requirement of simple and inexpensive solutions for both sensors and test benches. Experimental results show that satisfactory calibration accuracy could be achieved, also for the low frequency range, 0 to 10 Hz, but it strongly depends on the motion positioning with respect to the vertical axis, on the imposed motion law and, finally, on the parameter used as the reference. Requirements to be satisfied by the sensor are also analysed.

Evaluation of aspects affecting measurement of three-axis accelerometers

D'EMILIA, Giulio;GASPARI, ANTONELLA;NATALE, EMANUELA
2016-01-01

Abstract

In order to set integrated procedures involving geotechnical and structural aspects finalized to buildings diagnostics, uncertainty aspects are discussed concerning three-axis accelerometers and inclinometers for a distributed sensor network, allowing us to operate in a selective manner and preferring the most critical situations. Main topics to be considered for the uncertainty evaluation of measurements and of information to be used for building diagnostics are discussed. As a first step of the whole procedure of uncertainty evaluation, particular attention is dedicated to the calibration of sensors to be used, taking into account the requirement of simple and inexpensive solutions for both sensors and test benches. Experimental results show that satisfactory calibration accuracy could be achieved, also for the low frequency range, 0 to 10 Hz, but it strongly depends on the motion positioning with respect to the vertical axis, on the imposed motion law and, finally, on the parameter used as the reference. Requirements to be satisfied by the sensor are also analysed.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11697/14078
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 24
  • ???jsp.display-item.citation.isi??? 14
social impact