Two processes for ethanol production from wheat straw have been evaluated — separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF). The study compares the ethanol yield for biomass subjected to varying steam explosion pretreatment conditions: temperature and time of pretreatment was 200°C or 217°C and at 3 or 10 min. A rinsing procedure with water and NaOH solutions was employed for removing lignin residues and the products of hemicellulose degradation from the biomass, resulting in a final structure that facilitated enzymatic hydrolysis. Biomass loading in the bioreactor ranged from 25 to 100 g l−1 (dry weight). The enzyme-to-biomass mass ratio was 0.06. Ethanol yields close to 81% of theoretical were achieved in the two-step process (SHF) at hydrolysis and fermentation temperatures of 45°C and 37°C, respectively. The broth required addition of nutrients. Sterilisation of the biomass hydrolysate in SHF and of reaction medium in SSF can be avoided as can the use of different buffers in the two stages. The optimum temperature for the single-step process (SSF) was found to be 37°C and ethanol yields close to 68% of theoretical were achieved. The SSF process required a much shorter overall process time (≈30 h) than the SHF process (96 h) and resulted in a large increase in ethanol productivity (0.837 g l−1 h−1 for SSF compared to 0.313 g l−1 h−1 for SHF). Journal of Industrial Microbiology & Biotechnology (2000) 25, 184–192.

Comparison of SHF and SSF processes for the bioconversion of steam-exploded wheat straw

GALLIFUOCO A.;CANTARELLA, Maria
2000-01-01

Abstract

Two processes for ethanol production from wheat straw have been evaluated — separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF). The study compares the ethanol yield for biomass subjected to varying steam explosion pretreatment conditions: temperature and time of pretreatment was 200°C or 217°C and at 3 or 10 min. A rinsing procedure with water and NaOH solutions was employed for removing lignin residues and the products of hemicellulose degradation from the biomass, resulting in a final structure that facilitated enzymatic hydrolysis. Biomass loading in the bioreactor ranged from 25 to 100 g l−1 (dry weight). The enzyme-to-biomass mass ratio was 0.06. Ethanol yields close to 81% of theoretical were achieved in the two-step process (SHF) at hydrolysis and fermentation temperatures of 45°C and 37°C, respectively. The broth required addition of nutrients. Sterilisation of the biomass hydrolysate in SHF and of reaction medium in SSF can be avoided as can the use of different buffers in the two stages. The optimum temperature for the single-step process (SSF) was found to be 37°C and ethanol yields close to 68% of theoretical were achieved. The SSF process required a much shorter overall process time (≈30 h) than the SHF process (96 h) and resulted in a large increase in ethanol productivity (0.837 g l−1 h−1 for SSF compared to 0.313 g l−1 h−1 for SHF). Journal of Industrial Microbiology & Biotechnology (2000) 25, 184–192.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11697/15990
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact