An effective method for extracting parameters of a Debye or a Lorentzian dispersive medium over a wideband frequency range using a genetic algorithm (GA) and a transmission-line model is presented. Scattering parameters (S-parameters) of the transmission-line sections, including a parallel plate, microstrip, and stripline, are measured. Wave equations for TEM/quasi-TEM mode with a complex propagation constant and a frequency-dependent wave impedance are used to evaluate the corresponding S-parameters in an analytical model. The discrepancy between the modeled and measured S-parameters is defined as the objective function in the GA. The GA is used for search of the dispersive-medium parameters by means of minimizing the objective function over the entire frequency range of interest. The reconstructed Debye or Lorentzian dispersive material parameters are corroborated by comparing the original measurements with the FDTD modeling results. The self-consistency of the proposed method is demonstrated by constructing different test structures with an identical material, i.e., material parameters of a substrate extracted from different transmission-line configurations. The port effects on the material parameter extraction are examined by using through-reflection-line calibration.

Reconstruction of dispersive dielectric properties for PCB substrates using a genetic algorithm

ANTONINI, GIULIO;ORLANDI, Antonio
2008-01-01

Abstract

An effective method for extracting parameters of a Debye or a Lorentzian dispersive medium over a wideband frequency range using a genetic algorithm (GA) and a transmission-line model is presented. Scattering parameters (S-parameters) of the transmission-line sections, including a parallel plate, microstrip, and stripline, are measured. Wave equations for TEM/quasi-TEM mode with a complex propagation constant and a frequency-dependent wave impedance are used to evaluate the corresponding S-parameters in an analytical model. The discrepancy between the modeled and measured S-parameters is defined as the objective function in the GA. The GA is used for search of the dispersive-medium parameters by means of minimizing the objective function over the entire frequency range of interest. The reconstructed Debye or Lorentzian dispersive material parameters are corroborated by comparing the original measurements with the FDTD modeling results. The self-consistency of the proposed method is demonstrated by constructing different test structures with an identical material, i.e., material parameters of a substrate extracted from different transmission-line configurations. The port effects on the material parameter extraction are examined by using through-reflection-line calibration.
File in questo prodotto:
File Dimensione Formato  
reconstruction.pdf

solo utenti autorizzati

Licenza: Non specificato
Dimensione 1.47 MB
Formato Adobe PDF
1.47 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11697/2923
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 39
  • ???jsp.display-item.citation.isi??? 33
social impact