The stick-slip phenomenon is a jerking motion that may occur when two objects are forced to slide with friction over each other. There are many situations in which this motion can be observed in practice, for example, between the components of different kinds of seis- mic protection systems, such as the slabs of some friction dampers or the sliding elements of some base isolation systems. Such systems are generally designed to work in a smooth and flawless manner. However, it cannot be excluded that in particular situations undesired jerk- ing motions may develop. These kinds of situations are widespread in all areas of engineering and may result in very complex nonlinear dynamic behavior even when only a small number of degrees of freedom are involved. Over the years, several investigations have been con- ducted to better understand the dynamic behavior of systems in which two components are forced to slide with friction over each other, the ultimate objective being to identify conditions that may disrupt their proper functioning and optimize their performance. The body of litera- ture on this particular topic may be subdivided into two main categories. The first is represented by numerical studies performed by means of finite element models. The second approach, to which this work belongs, is conducted via simplified models which regard the considered system as a mechanical system endowed with a small number of degrees of free- dom. A simple scheme for problems of this kind consists of a rigid block connected elastically to a rigid support, while its base is in contact with a moving rough surface. Both the support and surface can be assigned a prescribed motion. Despite its apparent simplicity, this model can provide some useful indications on the main features of many interesting physical sys- tems. This contribution illustrates an analytical study conducted to better understand the non- linear dynamic behavior of systems of this kind, with the objective of identifying the condi- tions that may disrupt their proper functioning. In particular, the equations of motion are solved analytically, the sticking and sliding phases are studied, the influence on the solution of some of the system main parameters is investigated, and some typical long-term responses of the system are discussed. Lastly, some results obtained by means of an expressly developed numerical procedure are illustrated.
A SIMPLE MODEL FOR PREDICTING THE NONLIENAR DYNAMIC BEHAVIOR OF ELASTIC SYSTEMS SUBJECTED TO FRICTION
Giovanni Migliaccio
2020-01-01
Abstract
The stick-slip phenomenon is a jerking motion that may occur when two objects are forced to slide with friction over each other. There are many situations in which this motion can be observed in practice, for example, between the components of different kinds of seis- mic protection systems, such as the slabs of some friction dampers or the sliding elements of some base isolation systems. Such systems are generally designed to work in a smooth and flawless manner. However, it cannot be excluded that in particular situations undesired jerk- ing motions may develop. These kinds of situations are widespread in all areas of engineering and may result in very complex nonlinear dynamic behavior even when only a small number of degrees of freedom are involved. Over the years, several investigations have been con- ducted to better understand the dynamic behavior of systems in which two components are forced to slide with friction over each other, the ultimate objective being to identify conditions that may disrupt their proper functioning and optimize their performance. The body of litera- ture on this particular topic may be subdivided into two main categories. The first is represented by numerical studies performed by means of finite element models. The second approach, to which this work belongs, is conducted via simplified models which regard the considered system as a mechanical system endowed with a small number of degrees of free- dom. A simple scheme for problems of this kind consists of a rigid block connected elastically to a rigid support, while its base is in contact with a moving rough surface. Both the support and surface can be assigned a prescribed motion. Despite its apparent simplicity, this model can provide some useful indications on the main features of many interesting physical sys- tems. This contribution illustrates an analytical study conducted to better understand the non- linear dynamic behavior of systems of this kind, with the objective of identifying the condi- tions that may disrupt their proper functioning. In particular, the equations of motion are solved analytically, the sticking and sliding phases are studied, the influence on the solution of some of the system main parameters is investigated, and some typical long-term responses of the system are discussed. Lastly, some results obtained by means of an expressly developed numerical procedure are illustrated.Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
