The dynamic properties of soils play a crucial role in solving many geotechnical problems with special attention to earthquake engineering. In particular, the small-strain soil behavior should be accurately reproduced in geotechnical modelling to allow quantifying of the earthquake-induced site response. If the determination of the small-strain shear modulus can be easily inferred from in-situ measurements of shear wave velocity, the small-strain damping ratio of soils is rarely obtained from in-situ tests and it is commonly defined through cyclic or dynamic laboratory tests. This paper describes preliminary findings obtained from a laboratory investigation performed to measure the small-strain dynamic properties of the silty sand deposit of the Pizzoli site (L’Aquila, Italy). Due to the remarkable seismic hazard of the considered area, demonstrated by several seismic events, such as recently the 2009 L’Aquila and the 2016-2017 Central Italy earthquakes, and in the past, the 2 February 1703 earthquake, a specific investigation program including boreholes, geophysical and geotechnical in-situ tests was carried out. Resonant column tests have been also performed at the Geotechnical Laboratory of the University of L’Aquila in both forced and free vibration modes. The interpretation of the results has been used to identify the small-strain shear modulus and damping ratio. The shear modulus as obtained from the laboratory has been compared with that obtained via the existing in-situ shear wave velocity measurements. In contrast, the damping ratio has been compared with the value estimated with a literature relationship proposed for soil deposits of Central Italy.
Preliminary findings on the experimental investigation of the small-strain behaviour of Pizzoli silty sand
Chiaradonna A.
;Monaco P.
2023-01-01
Abstract
The dynamic properties of soils play a crucial role in solving many geotechnical problems with special attention to earthquake engineering. In particular, the small-strain soil behavior should be accurately reproduced in geotechnical modelling to allow quantifying of the earthquake-induced site response. If the determination of the small-strain shear modulus can be easily inferred from in-situ measurements of shear wave velocity, the small-strain damping ratio of soils is rarely obtained from in-situ tests and it is commonly defined through cyclic or dynamic laboratory tests. This paper describes preliminary findings obtained from a laboratory investigation performed to measure the small-strain dynamic properties of the silty sand deposit of the Pizzoli site (L’Aquila, Italy). Due to the remarkable seismic hazard of the considered area, demonstrated by several seismic events, such as recently the 2009 L’Aquila and the 2016-2017 Central Italy earthquakes, and in the past, the 2 February 1703 earthquake, a specific investigation program including boreholes, geophysical and geotechnical in-situ tests was carried out. Resonant column tests have been also performed at the Geotechnical Laboratory of the University of L’Aquila in both forced and free vibration modes. The interpretation of the results has been used to identify the small-strain shear modulus and damping ratio. The shear modulus as obtained from the laboratory has been compared with that obtained via the existing in-situ shear wave velocity measurements. In contrast, the damping ratio has been compared with the value estimated with a literature relationship proposed for soil deposits of Central Italy.Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.